Odin3 v3.13.1 Samsung Odin ROM Flashing tool, update Samsung device. You can root your device by 3.13.1 version. this tool can be used by a beginner that means it very easy to operate. in only three steps it flashes the Samsung mobile.

Download Latest Samsung Odin3

Always use Latest version of Samsung Odin, to flash Samsung Galaxy devices.

Download Odin3 v3.13.1

Download

summary 

Install Odin v3.13.1 Samsung Odin ROM Flashing tool, update Samsung device

• 1.1 Download Odin v3.13.1
• 1.2 How to use Odin Odin.
• 1.3 How to flash Samsung mobile using Odin

Other Versions

• Samsung Odin3 v1.85
• Mobile Odin Lite
• Samsung Odin 3.9
• fast Odin v3.10.6
• Samsung Odin v3.11.1
• Minimal ADB and Fastboot Tool
• Odin Multi Downloader
• new Odin v3.12.3
• Samsung USB Drivers 1.5.27.0

How to flash Samsung mobile using Odin

• First, download Samsun firmware and extract the file.

Install Samsung Odin Odin3 v3.13.1 in windows 10

• Put the device into download mode 
  • Turn the device off
  • Press and hold “volume down“, home and “power key” together
  • Press “volume up” button to continue
• Connect the USB Cable (always use original USB cable)
• Now open Odin and select the AP file in AP field
• Click on the “start button”
• After finish, the flashing device will reboot automatically and you will see the pass message in Odin.

During the flashing do not disconnect the device from the computer. in case the device is disconnected flash the device again. Remember all the data from the device will be removed after the flash if you have some important data in the mobile please make a backup first.